BMS-2 Valcom

The BMS-2 system is designed to control the level in ballast and service tanks, as well as to measure the draft of the ship, floating platform or oil platform. The BMS-2 system is a hardware-software complex, which includes:

• local processing station

• computer operator stations

The measurement data are displayed on the displays of the operator stations, level indicators or transmitted to the automation system.

The main advantages of the new system are:

• minimum air consumption due to the impulse operation of the system - no more than 0.2 l / h;

• Built-in zero and maximum autocalibration system;

• periodic automatic cleaning of measuring tubes for protection against contamination and freezing;

• automatic leakage monitoring in measuring tubes.

The following information is displayed on the operator station screen:

• the mnemonic diagram of the ballast system;
• level in the ballast / service tank, corrected by roll / differential;
• calculated product volume;
• calculated ballast weight;
• upper and lower alarm levels;
•  draft - nose, feed, midsection;
• value of roll and trim.

The BMS-2 system can be used separately or as part of the Integrated Control System for Technical Means ( TSS / Control ) - TSS / Control

Technical characteristics of the BMS-2 system

• Total number of control points to 100 points
• Control of the draft of 6 points (on request)
• Accuracy of level measurement ± 0,25% FS
• Accuracy of precipitation measurement ± 0.25% FS
• 220 Volt system power supply
• Power consumption up to 1.5 W / channel
• Air consumption 0.2 l / h