+7 (812) 4-673-673
MF / HF radio 'Aquanaut'
MF / HF radio 'Aquanaut' is equipped with all the necessary features to ensure high-quality stable connection on the vessel. The radio is designed in accordance with the requirements for GMDSS equipment. The radio is designed to receive and transmit signals of distress, urgency and safety system GMDSS public correspondence, exchange of information related to the operation of the vessel in the Digital Selective Calling (DSC) and narrow-band direct-printing radio-telephony (telex).
Specifications:
- Frequency range 1,5-29,99999 MHz (transmitter), 0,14-29,99999 MHz (receiver), 2187.5; 4207.5; 6312; 8414.5; 12577; 16804.5 kHz (DSC receiver in scan mode)
- The output power of 100 W or 200
- Frequency spacing 10 Hz
- Classes of emission J3E, H3E, J2B, F1B (possible introduction of new types of signals, including high-speed modems, during operation by modifying the control software)
- Communication Systems DSC wireless telephony, telex
- Operating Modes Simplex, half-duplex
- Power 220 +/- 22 V, 50 Hz / 24 (6 + / -3.6) In
- Consumption of no more than 400 watts (for the version with 100 W amplifier); no more than 700 watts (for the version with 200 W amplifier)
- The relative deviation of the tuning frequency of +/- 1 * 10 -7 degree
- External interfaces / protocols Ethernet / IEC 61162-450
- Operating temperature range -15 ° C ~ + 55 ° C
- Degree of protection IP21
- Warm-up time Less than 50 seconds
- While switching transmit / receive no more than 450 ms
- Time adjustment of frequency less than 1 s
- Sensitivity Not more than 6 mV emf (With respect to S / N 20 dB)
- Priemovozbuditel 278h104h326 mm / 6.2 kg
- Power Amplifier 100W 278h145h326 mm / 9.5 kg
- 200 W power amplifier 278h145h326 mm / 10 kg
- Remote control 285h210h41 mm / 2.3 kg
- Power supply 150h185h465 mm / 8.0 kg
- Handset 96h57h260 mm / 0.55 kg
- External speaker 150h160h150 mm / 1.2 kg
Available for order
Documentation:
Gyrocompass System NAVIGAT 200
Equipment and wiring diagrams