-
Services
-
-
Additional- Headsets
- Hydrostat
- Spare parts for Command Intercom System
- Spare kit for gyrocompass
- Parts and accessories for Typhon
- Magnetrons
- Converters and distributors
- Batteryless telephone system
- Fire safety systems
- Ship displays and PC
- Ship Typhon
- Battery
- Power Supply
- Additional units
- Video
- Limiters
- Antennas
- Blocks for testing
- Connecting cables
- Echosounder sensors
-
-
Useful
-
Our production
+7 (812) 4-673-673
Manual Call Point Salwico NS-ACP
Salwico NS-ACP - manual call point for fire alarm cistem Salwico CS4000, NSAC-1 and CS3000 with SPK2000. By clicking on the glass, causing it to crack, activated the fire alarm. Protective plastic glass prevents operator injury. Red LED is lit at the time of the call, when the control panel has received an alarm signal. It will light up until the glass is replaced, and will not reset the alarm control panel.
The address is set using DIP-switch installed inside the call point.
call point is independent of polarity.
Specifications:
- Rated voltage: 24 V DC
- Operating voltage: 15-35 VDC
- Operating current: control / alarm 0.2 mA / 2.5 mA
- Degree of protection: IP24D
- Operating temperature range: -25 ° C to + 70 ° C
- Environment humidity: 0 to 95% RH
- Colour: Red
- Weight ~ 135 g
Available for order
Documentation:
Spare parts for VDR Danelec
Catalog of spare parts for DM100 VDR / S-VDR, DM100 L-VDR, DM400, DM200, DM500, DM300 S-VDR