BF-510WP-H

BF-510WP-H
Available for order

BF-510WP-H

to order
Call our sales manager
Documentation:
Manual call point BF-510-WP-H is used in the interactive fire alarm system address Autroprime company Autronica as optional equipment. It is a budget version compared to Autrosafe system. Thanks to its special construction detector is weatherproof and resistant to harsh environmental conditions. BF-510-WP-H is suitable for use in open spaces. The design meets the requirements of the major certification bodies in the sea. Approved in accordance with EN 54-11 and EN 54-17.
 
BF-510-WP-H is used as hotbeds of fire detection devices, open flames and smoldering fires on small objects. It is recommended to install the sensor along escape routes, landings and exits.
 
Provided self-test function SelfVerify, which guarantees high reliability. It is specifically designed to simplify the operation of the device, since all elements are automatic self-test every 24 hours. For enhanced security, a built-in short circuit isolator
 
To activate the alarm, the user only has to break the glass. The maximum response time is 3 seconds. To restore the device back into working condition, you need to install the new glass.
 
Specifications:
  • Weight - 200 g
  • Voltage - 16 - 26 VDC
  • Current consumption - 0,3mA
  • Maximum current - 400 mA
  • The requirement - EN 54
  • Degree of protection - IP55 with cover / IP52 without cover
  • Operating temperature - 40 to + 70 ° C
  • Storage temperature - 55 to + 70 ° C

Factory acceptance tests 12.09.2021 Factory acceptance tests
Commissioning is the process of fine-tuning the installed equipment so that it works correctly and performs its functions. They are carried out in stages, starting from the manufacturer's workshop, where important equipment is checked before being sent to the shipyard. These checks carried out by the manufacturer are called Factory Acceptance Test (FAT). They confirm that the equipment was in order when it left the shop.