+7 (812) 4-673-673
UV flame detector Salwico NS-AUV
Salwico NS-AUV is an analogue of the flame detector for fire alarm systems Salwico. It is sensitive to ultraviolet light emitted by the flame.
Due to its high sensitivity to UV radiation and the embedded advanced algorithms alarm to avoid false alarms, the sensor is very effective for use in fire protection systems. The flame detector Salwico NS-AUV has a very wide viewing angle, which it can cover large areas, as well as the UV tube, quartz glass is protected. This flame detector is suitable for use in harsh environmental conditions. When the detector is in alarm, the red LED on
the detector will light. It will light up until the alarm on the control panel will not be reset.
The address is set using DIP-switch.
The detector is independent of polarity.
Exterior LED, buzzer, etc. They can be connected to the remote output.
Specifications:
- Sensor Type: UV
- Detection wavelength: 185 - 260 nm
- Viewing Angle: 100 °
- System voltage: 24 V DC
- Operating voltage: 15 - 35 V DC
- Operating current - control / alarm: 0.3 mA / 2.0 mA
- Remote output: 2 mA (for remote indication)
- Operating temperature: -25 ° C to + 70 ° C
- Environment humidity: 0 to 95% RH
- White color
- Material: ACS
- Weight ~ 105 g
Available for order
Documentation:
Navigational errors
Navigation instruments rarely show true readings. The sum of errors of instruments and methods affects the accuracy of navigation and should be adjusted taking into account a sufficient safety margin