ENG

Timer Salwico NS-TIMAC1

Timer Salwico NS-TIMAC1
Salwico NS-TIMAC1 is an analog timer for the fire alarm system Salwico NSAC-1. Detector circuit connected to anywhere in the system, it may disable the function blocks or at any time. When the timer is activated, the central panel will disconnect the unit / units that have been defined in the configuration program is loaded in the center pane. All types of circuit devices can be separated as a single block, multiple blocks or group of blocks. Just when the timer can be used to disable some functions in multifunction sensors, for example, are sensitive to the smoke detector from the 'smoke / heat'. NS-TIMAC1 Timer is used to prevent system operation if it emits smoke from welding or exhaust gases during loading and unloading vehicles, etc.
 
There are six standard timers on the choice of 0-15 minutes, 0-30 minutes, 0-60 minutes, 0-120 minutes, 0-6 hours and 0-12 hours.
 
Specifications:Timer Salwico NS-TIMAC1
  • Rated voltage: 24 V DC
  • Operating voltage: 15-35 VDC
  • Operating current 2.5 mA (max)
  • protection: IP55
  • Cable size: 8-14 mm
  • Cable terminals: 2.5 mm?
  • Operating temperature range: -25 ° C to + 70 ° C
  • Ambient Humidity: 0 - 95% relative humidity, non-condensing
  • Material: Plastic
  • Colour: Grey
  • Weight ~ 650 g
Available for order

Timer Salwico NS-TIMAC1

to order
Call our sales manager

SKIPPER Electronics SKIPPER Electronics SKIPPER Electronics catalog of equipment and spare parts