MG5437 X-Band Magnetron

MG5437 X-Band Magnetron
MG5437 X-Band Magnetron - for RADTRAP radar a magnetron with fixed rfequency pulse constructed in accordance with technology E2V, which ensures safety in handling and operation. MG5437 X-Band Magnetron operates at frequencies 9410 ± 30 MHz. This equipment is manufactured on the principle of maximum limits in contact with high voltage circuits and all high voltage circuits and terminals are hidden. Equipped with emergency button to turn off the power supply in the event of a device failure.
Specifications:                                                                MG5437 X-Band Magnetron
  • The operating frequency - 9410 ± 30 MHz
  • Maximum peak power - 25kW
  • Coupler - IEC UBR100
  • Cooling - natural
  • The indirectly heated cathode
  • Heater voltage - 6.3 V
  • Current heater - 6,3 V - 0,5 A
  • Weight - 0.7 kg
  • Mounting position - Any
  • Minimum clearance - 20 mm
  • Anode current (peak value) - 6.0 10 A
  • Power consumption (peak) - 5.7 kW
  • Power consumption (average) - 6.9 W
  • MT48LC8M16A2TG-75 technology: G e2v SDRAM
  • AT84AS001 e2v Broadband Data Converter
  • EV12AS200A e2v Broadband Data Converter
  • GXF300 e2v Surge
  • MA2162A e2v trigger
  • N20181 e2v Helix TWT
  • DA65361 e2v amplifier
  • TS68302 e2v high reliability microprocessor
  • System IOTD2100 e2v
  • EV8AQ160 e2v Broadband Data Converter
  • MT46V32M16FN-6 technology: F e2v DDR SDRAM memory
  • Sensor EV76C661 ABT / ACT e2v


Additional Information
Summary table of magnetrons
How to replace a magnetron with a radar
Magnetrons for radar in stock
Available for order

MG5437 X-Band Magnetron

to order
Call our sales manager

Factory acceptance tests Factory acceptance tests Commissioning is the process of fine-tuning the installed equipment so that it works correctly and performs its functions. They are carried out in stages, starting from the manufacturer's workshop, where important equipment is checked before being sent to the shipyard. These checks carried out by the manufacturer are called Factory Acceptance Test (FAT). They confirm that the equipment was in order when it left the shop.