ENG
ETB-10
ETB-10 - is a two-way hands-free communication system, suitable for use on ships. It is used as communication equipment to transmit messages and coordinate crew activities in the work areas. The system supports up to 10 lines, operating from 24 V DC power supply.
ETB-10 is certified by the Russian Maritime Register of Shipping.
Since the device is equipped with special buttons with LED flashing lights, it can be used in noisy environments where audio may not be heard by the crew. It works by a beeping sound and a voice message, which the volume is adjusted on the instrument panel. You can use a group or the general call. To send the message, the user must click the general or specific lines and speaking into the built-in microphone.
Substations can be located both inside and outside the vessel, greatly increasing the area of the male.
Additionally, you can connect the headset manually ETC-1-TB and microphone MB-30G. Accessories sold separately.
Specifications:
- Power - 24 V DC
- Installation - flush with 4 x 4 mm screws
- Cable entry - 6 x PG-16
- Degree of protection - IP-41
- Dimensions - 240h144h130
- Weight - 1.6 kg
- Power consumption - 0.9
- Output power - 15 W
- Frequency - 200 Hz - 8 kHz (-3 dB)
- Operating Temperature - -20 +55 ° C
Certificate:
-
RMRS
Available for order
Certificates:
Documentation:
Nautical information Navigation starts with a Passage Plan from berth to berth. The planned route is plotted on the chart or electronic chart of the navigation system