ENG

Mircophone DEMSH

Mircophone DEMSH
DEMSH - is a small microphone with electromagnetic and differential characteristics. The principle of operation is to convert sound vibrations into electrical oscillations of sound frequency. It used as a general-purpose telephones and communications equipment and sound reinforcement. Thanks to its special construction can operate in tropical climates. The warranty period is 1 year, the calendar life of at least 5 years. It meets the requirements of IEC.
 
Structurally DEMSH microphone consists of:
  • Ring magnet;
  • windings;
  • Flange with hollow pole pieces;
  • membranes;
  • Case.
Microphone DEMSH - it symmetric electromagnetic system with the diaphragm, which is open on both sides. This design is necessary to carry out the forced vibrations to the beat of the air pressure changes in the case of uneven sound pressure side of the membrane. Guarantees quality microphone output signal with a significant suppression of various kinds of noise.
 
Specifications:
  • Dimensions - 30 x 23 x 10.8 mm;
  • Weight - 14 g;
  • Sensitivity at 1000 Hz - 0.4 - 1.25mV / Pa;
  • Frequency range - 400 - 1000 Hz;
  • Rated frequency range - 200-4000 Hz;
  • The impedance at the frequency of 1000 Hz - 20 +/- 40 ohms;
  • Module electrical impedance at the frequency of 1000 Hz - 400-1000 ohms.
  • Relative humidity - 98%
  • Working temperature - -60 + 60 ° C
  • The uneven frequency response - no more than 13 dB.
  • Acoustic asymmetry - does not exceed 20%
Available for order

Mircophone DEMSH

to order
Call our sales manager
Documentation:

Sending and receiving messages in Capsat Sending and receiving messages in Capsat The procedure for sending and receiving messages in Capsat