MF / HF Antennas AEP
PV-HF Antennas produced by AEP have an expanded diameter up to 52 mm, which increases their wear resistance, and hence the service life. Each antenna is designed to withstand the most negative (marine) weather conditions. When choosing an antenna, pay attention to the maximum value of resistance to wind, operating temperature, antenna diameter and the materials of which it consists.
Each MF / HF Antenna AEP comes with mounting. The type of fastening is determined by the last characters in the model name of the antenna. After the main product number "MPxxx", the letters used are:
D = deck installation
M = Mast mounting
S = Side feed connections
name |
MP622D |
MP803MS |
MP480MS |
section |
2 |
3 |
2 |
Diameter of the base (mm) |
40 |
40 |
25 |
composition |
Epoxy fiberglass |
||
decoration |
Polyurethane paint |
||
Colour |
White RAL 9000 * Gray RAL 7001 ** |
||
ferrule |
Chrome plated brass *** |
||
Working temperature |
-35 ° C + 80 ° C |
||
Max. Resistance to wind |
150 km / h |
||
Length of fiberglass (m) |
6th |
8 |
4.8 |
Length Electrical (m) |
6th |
7th |
|
Length of the lower part (m) |
3 |
3 |
|
Length of middle section (m) |
|
2.5 |
|
Length of the upper part (m) |
3 |
2.5 |
|
Weight, kg) |
6th |
9 |
3 |
fit |
MIL-STD 810E MIL-STD 167-1 MILS-STD 810E |
||
The basic torsional force (N) |
120 |
80/200 (1) |
70 |
Frequency (Mhz) |
1,6 -30 ATU transmission 0,15-30 reception with transformer |
||
Elements of irradiation |
brass |
||
Max. Input (W) |
800 |
1200 |
500 |
polarization |
vertical |
||
Horizontal irradiation |
360 ° |
||
compound |
TX with RX insulation cable with RG-58 or RG-213 coaxial cable |
||
connector |
Bolt 8 mm |
Bolt 6 mm |
ATLAS Radar KIT Spare parts for ATLAS Radar