ENG

Power Amplifier VPA-120

Power Amplifier VPA-120
Available for order

Power Amplifier VPA-120

to order
Call our sales manager
Documentation:
VPA-120 - is a power amplifier 19 inch casing. Mounted directly into the rack. It has outputs at 100 V and 8 ohm, and two switch inputs with priority. The amplifier is protected against overload and short circuit. Equipped with LED status indicators. It has a low noise level during operation. The temperature is controlled by a special fan. It meets the safety requirements of EN 60945 operation, IACS E10, IEC 60533.
 
Power VPA-120 operates on 115/230 VAC mains with the ability to automatically switch to 24 VDC. For external equipment provides 800 mA output. Designed to work on various ships. The case is made of durable materials.
 
Specifications:
  • Dimensions - 482 x 133 x 420 mm
  • Weight - 18.2 kg
  • Voltage - 115/230 V ± 10%, 50/60 Hz, 391 VA, 24 VDC ± 25% - not more than 15.4 A
  • Operating temperature - -15 - + 55 ° C
  • Relative humidity - <95%
  • Exit - 100 V, 8 Ohms - 240 W
  • Frequency - 50 Hz - 20 kHz ± 3 dB
  • Distortion <1% - at 1 kHz
  • 3-pin XLR connector
  • Safety - EN 60065
  • Connections - screw terminals

Power Amplifier VPA-120

Decoding of NMEA signals (Part 2) Decoding of NMEA signals (Part 2) This section describes the functionality associated with the reception of data from navigation sensors, supporting the standard IEC 61162-1 or NMEA 0183.