Valcom UPT (pressure transducer)

The UPT pressure transducer can be used to measure pressure in tanks, cargo and settling tanks and pipelines and for level measurement (hydrostatic) in service ballast tanks, as well as for measuring precipitation. In the converter there is a sensor element and a secondary converter (electronic unit) installed in one housing or in different housings connected by a rigid or flexible connecting element. The sensor element of the sensor is protected by a metal separation membrane from the environment.

The body and diaphragm of the sensor are made of stainless steel.

Upon request, the UPT pressure transmitter can be made with various types of threaded and flanged connections, as well as with extension cords for top tanks (for bottom tanks).

UPT specifications

• Output signal 4-20 mA, 2 wires

• Linearity 0.2% of the measuring range

• Hysteresis and repeatability 0.1% of the measured range

• Calibration accuracy 0.25% of the measuring range

• The temperature drift of zero is 0.25% / 10 ° C (-10 ° C ... +80 ° C)

• Power supply 12-30 V DC

• Load resistance not more than 600 Ω at 24 V DC

• Operating temperature -40 ° C ... + 80 ° C

• Limiting temperature -55ºС ... + 125ºС