Valcom TLA (two-point level indicator)

Valcom TLA  (two-point level indicator)
Valcom TLA  (two-point level indicator)
Valcom TLA  (two-point level indicator)
Available for order

Valcom TLA (two-point level indicator)

to order
Call our sales manager

The TLA sensor is designed to control the level of any liquid products in tanks and tanks of any type. The main applications of sensors are shipbuilding and transportation of liquid cargo, oil and gas sector, military-industrial complex, also in food, chemical and other industries.  

Design and principle of operation of level switches:

  • The TLA sensor includes a housing, an acoustic waveguide, a mounting flange / threaded bracket and an extension. The waveguide consists of two fixed rods, the length of which is determined by the customer.

  • According to the requirements of classification societies, the sensor is equipped with two check buttons before loading.

  • In the delivery set is a flexible metal hose with a length of 0.5 m for connecting to the metal pipe cable routes on the deck.

The principle of the signaling device is the use of features

propagation of ultrasonic waves in a metal rod. At the end of the waveguide, a piezoelectric transducer is installed, exciting it pulses that propagate along the waveguide in the form of acoustic waves. When the surface of the sensitive zone is in contact with the liquid, the acoustic vibrations are damped (absorbed) and the duration of the reflected pulses sharply decreases. This locks the electronic unit, which changes the value of the output current or the status of the relay output contacts. The alarm is triggered by contact with the liquid only in the sensitive area.

 TLA sensor specifications:

  • Case material Stainless steel AISI 316L

  • Electrical connection 4-wire line - 4-20 mA

  • Explosion protection EEx ia IIC T6

  • Degree of protection IP67

  • Operating temperature range -55 ° C to +100 ° C

  • Number of alarm points 2

  • Built-in test buttons 2

  • 24 VDC power supply

Operation of level alarms

Ultrasonic level alarms are installed on tanks, pipelines, mobile and fixed objects in any spatial position. The extended range of climatic conditions of operation allows the installation of level indicators, including in the open air with an ambient temperature of -55 ° C.

Setting the positioning source on the NaviTreks Locman 19.04.2017 Setting the positioning source on the NaviTreks Locman
Step-by-step procedure for setting the positioning source on the NaviTreks Locman