Valcom TGD multi-parameter measuring instrument

The multi-parameter measuring instrument TGD serves for a one-time measurement of the level, temperature, pressure and density of the liquid. TGD also determines the level of bottom water in tanks and storage facilities for oil, oil products and liquefied gases, on offshore drilling platforms and floating storage facilities. Depending on what these sensors are designed for, they are available in single, 2, 3, and 4-channel implementations.

The TGD sensor is the basis for the operational and technological accounting system for petroleum products in tank farms - TSS / OIL.

Specifications:

• Case material Stainless steel AISI 316L
• Electrical connection + 4-20 mA 2-wire line (HART)
• Explosion protection EEx ia IIC T5
• Degree of protection IP67
• Operating temperature range -40 С - +85 С
• L-level measurement
• Measuring point range 0 ... 30 m
• Measurement accuracy +/- 2 mm
• Product temperature range -200 С - +150 С
• T-measurement of temperature
• Number of measuring points up to 3 points
• The accuracy of the measurements is 0.15 deg.
• The range of measured temperatures is -50 С - +150 С
• D-density measurement
• Measuring range 500 - 1200 kg / m ^ 3
• Measurement accuracy 0.1% of the measuring range
• Measuring the pressure in the tank
• Measuring range on request
• Accuracy of measurement 0.15%
• Measuring the pressure in the tank
• Measuring range 0 - 0.5 m
• Measurement accuracy 1 cm