+7 (812) 4-673-673
Koden KGC-222
Discontinued. Replacement: ComNav G2
The Koden KGC-222 is a satellite compass designed to receive and display information about a ship's course and position, including speed relative to the bottom (SOG), course relative to the bottom (COG), turning speed (ROT), and coordinates (latitude/longitude). The KGC-222 kit includes a display, a GPS antenna, a 15-meter antenna cable, power cables and an installation kit. As an additional device, you can use the universal digital repeater MTRD-104, which displays data in NMEA 0183 format.
The MTRD-104 repeater displays data on a graphical LCD display in the form of graphs, analog instruments or digital values, allowing up to four types of data to be displayed simultaneously on one screen. The user can customize five 'virtual' screens to suit their needs.
Advantages of the Koden KGC-222 satellite compass:
Technical specifications:
Course accuracy:
Output port:
Power supply:
Type: GPS-based satellite compass operating in WAAS/EGNOS systems
Certificate: Manufacturer's Approval
Manufacturer: Koden (Japan)
Protection class:
Temperature range:
The Koden KGC-222 is a satellite compass designed to receive and display information about a ship's course and position, including speed relative to the bottom (SOG), course relative to the bottom (COG), turning speed (ROT), and coordinates (latitude/longitude). The KGC-222 kit includes a display, a GPS antenna, a 15-meter antenna cable, power cables and an installation kit. As an additional device, you can use the universal digital repeater MTRD-104, which displays data in NMEA 0183 format.
The MTRD-104 repeater displays data on a graphical LCD display in the form of graphs, analog instruments or digital values, allowing up to four types of data to be displayed simultaneously on one screen. The user can customize five 'virtual' screens to suit their needs.
Advantages of the Koden KGC-222 satellite compass:
- Course accuracy: The RMS value of the course accuracy is 1 due to the unique KODEN phase measurement technology.
- Quick Start: Information about the course is available one minute after switching on.
- Full data set: In addition to the course, the device displays the coordinates and speed of the vessel.
- Maintenance-free: The equipment does not require periodic inspections and maintenance.
Technical specifications:
Course accuracy:
- Accuracy of readings: 1 rms (RMS value)
- Resolution: 0.1
- Number of received channels: 16 parallel channels
- Setting time: 9 minutes (with standard warm-up time)
- Sensitivity: Better than -130 dBm
- Maximum turning speed: 45/sec
- Pitching Angle: Less than 30
- The main length of the line: 0.5 m
Output port:
- Exchange rate data: 2 (interval 50 ms to 1 s)
- Navigation data: 2 (interval of 1 s)
- Output data format: RS-422
- Reception frequency: 1575.42 MHz ± 1 MHz
- Accuracy: 1 rms (RMS value)
Power supply:
- Supply voltage: 10.8 to 31.2 VDC
- Power: less than 9W (at 24 VDC)
Type: GPS-based satellite compass operating in WAAS/EGNOS systems
Certificate: Manufacturer's Approval
Manufacturer: Koden (Japan)
Protection class:
- GPS antenna: IPX6
- Processor: IPX4
Temperature range:
- GPS antenna: -25C to +55C
- Processor: -15C to +55C
Available for order
Certificates:
Documentation:
General ship layout and various systems
Shown here are diagrams of the general layout of the vessel (compartments, equipment) and various systems (air compressor, seawater system, fresh water system, electricity supply organization)