+7 (812) 4-673-673
Magnetron MG5125P
MG5125P Magnetron for linear accelerators, operates at frequencies 2993 - 3002 MHz with peak output power of 2000 kW.
Magnetron MG5125R cooled by water and has a built-in waterproof case. Recommended flow rate of 5 liters per minute or more, the pressure flow rate is about 1.25 kg / cm2. Leaving water temperature should not exceed 50 C.
The quality of all products is controlled by a random choice of the tubes, which are then tested under typical operating conditions. If the tube will operate under the conditions specified in the document, it will mean that the integrity of the magnetron is not compromised.
Specifications:
- The maximum anode voltage - 46 kV
- Maximum anode current of -100 A
- Input Power - 7.0 kW
- Pulse duration - 5.0 ms
- The rate of rise of the pulse voltage - 120 kV / m
- Frequency: 2993 to 3002 MHz
- Maximum power output - 2000 MW
- Heater Voltage - 8.5
- Weight - 8 kg
| Additional Information |
| Summary table of magnetrons |
| How to replace a magnetron with a radar |
| Magnetrons for radar in stock |
Available for order
Documentation:
Replacing magnetrons in a Sperry Marine radar
VisionMaster FT Series Radar Replacement Magnetrons