+7 (812) 4-673-673
Saura SCP-NT
Sensor Saura SCP-NT collects data from a magnetic compass, converts it to NMEA format and transmits it to other navigation equipment via HDMI or HDTV outputs. This sensor can be calibrated by connecting it to a computer via the RS 232C port and setting up 12 control points.
As the magnetic sensor may be used magnetic compasses Saura: SR- 165 / MR-165C / MR- 150 / T-130VD / T-130VF / T-150IIF.
- Source : DC - 12 ( +30 %, -10 %) , or alternating current - 220 N ± 10 % , 50/60Hz ± 5% (using the power supply MTPS- 303 -A2- 1).
- Operating temperature range -15 'C - +55 ° C - for units installed in the interior spaces of the vessel ; -25 ° C - +55 ° C - for units installed on the open deck .
- Located in the upper part of a compass that provides no interference of the correcting magnets
- Easy Installation
- data output NMEA HDM or HDT
- ease of maintenance
- no need for annual maintenance fluid replacement
- unique ultra-reliable rotation assembly of rose , consisting of needles made of platinum-iridium alloy and reinforced response node on compass rose made of sapphire.
- short production and stock the most popular models
- a large selection of compasses binnacle with different heights ( from 430 to 1225 mm. ) , as well as the presence of boat compasses and grid
Transmitting Heading Device type 'SCP-NT', consists of the following units :
- SCP-NT - scanning unit - processor (software version - A603 );
- SR-1651MR-165CIMR- 150 / T-130VDIT-130VFIT-150IIF - magnetic compasses used as a magnetic sensor ;
- MTRD- 104 - digital versatile repeater ;
- NRC- 150 - Repeater ;
- MTND- 102 - Amplifier - breeder signals.
- Additional block : MTPS- 303 -A2- 1 - Power Supply ( AC I DC) .
Certificate:
-
RMRS
-
RRR
Available for order
Certificates:
Documentation:
Gyrocompass system NAVIGAT 100
Equipment and wiring diagrams