Kata-Ivanovsky

SPECIFICATIONS: 

• Dimensions (pr.52) D594h1390 mm;
• Food on board 50 Hz 127/220 V;
• Diameter of rose 145 mm;
• Emergency power supply 24;
• Compass error of friction less than 0.2 ^o ;
• Time to bring a compass in readiness not more than 60;
• Graduation of rose 1 ^o .

Dining Compass KM145 

Magnetic compass KM145-M (KM145-K)  with electronic remote transmission is designed to measure, display and transmission of current values of the magnetic and true courses and can be installed as the main and steering compass for ships and vessels of any tonnage. Provides inclusion in integrated navigation system. 
compass provides accurate issuance of course when the ship's speed to 90 knots in unlimited navigation area. Information about the course is given in the form of digital (RS232/422) and analog (stepper) signals to digital and analog repeaters (line $ HCHDT). 
MEK945 Compass meets IEC 1162 (IEC 1162, NMEA 0183), IMO Resolution A.382, ISO 2269 Regulation of the Russian Maritime Register of Shipping (RMRS type approval certificate.) 
The composition of the compass are: Device 52, Pribor10, digital repeaters, analog repeater device 3I.

KM145-M1  - Remote magnetic compass readings with electronic transmission rate.

KM145-M2  - Remote magnetic compass readings with electronic transfer rate with compensator electromagnetic deviation (QED).

KM145-M3  - Remote magnetic compass readings with optical transmission rate of the main magnetic compass to the main magnetic steering position through fiber optics and electronic transmission rate indications.

KM145-M4  - Remote magnetic compass readings with the optical transmission rate of the main magnetic compass to main steering position through fiber optics and electronic transmission rate readings with compensator electromagnetic deviation (QED)

KM145-K  - Visual high magnetic compass binnacle

KM145-K1  - Visual high magnetic compass binnacle

KM145-K2  - Visual low magnetic compass binnacle

KM145-K3  - Remote magnetic compass readings with electronic transmission rate low binnacle

SPECIFICATIONS:

• - Diameter of rose 145mm;
• - Accuracy kursoukazaniya on a fixed base 0.5 ^on ;
• - Ambient temperature: 
  total: -40 to +70  ^o C, 
  the maximum allowable: -60  ^to C;
• - Vibration loads up to 200 Hz with acceleration up to 20 m / s ² ;
• - Shock to 150 m / s ² .

Magnetic compass UKPM-M  is designed for continuous measurement and guidance magnetic heading of the vessel, as well as to measure the bearing and azimuth on the ships and vessels of various classes, boats, lifeboats, yachts and as the main steering compass.

UKPM-grade M4 latitudinal compensator is certified by Russian Maritime Register of Shipping as the main magnetic compass without limitation applications for all types of vessels.

Meets the requirements of the Maritime and River Register of the Russian Federation on the equipment of sea and river vessels, IMO Resolution A.382 (10). Bundling UKPM-M4-M7 UKPM comply with resolution MSC/116 (73) to marine transmitting heading device. A certificate of Type Approval of Marine and River Register of the Russian Federation and the Ministry of Transport certificate. Magnetic compass UKPM-M1, M2 is interchangeable with the magnetic compass CM-100-M1, M2. With the adapter flange (to be ordered separately) can perform the installation UKPM-M instead of the old magnetic compasses UKP-M without additional installation. 

SPECIFICATIONS:

- Diameter of rose, ....................... 127 mm;

- Graduation of rose ...................... 1 ^on ;

- Accuracy of the compass from friction ........... 0.3 ^on ;

- Operating temperature: ................ -40 to +70  ^o C;

- Vibration at frequencies up to 200 Hz with acceleration up to 20 m / s ² ;

- Power supply (24 ± 2,4) or (27 ± 2,7) V, device 3 (115 ± 15) or (230 ± 23) V.

Complete with repeaters, translates the compass on interfaces RS232, RS422 (NMEA 0183 protocol, IEC 1162-1). Repeaters can be digital (display up to 0.1 deg), analog (dvushkalny, with a scale of 0.1 deg). Optional compact odnoshkalnye supplied analog repeaters (price division 5 deg) and DF repeaters - for removing bearings.

The repeater also available as 'the bracket' and 'for panel mounting.' Can be mounted on a bulkhead or ceiling coverings.

Has the following variants: