+7 (812) 4-673-673
ADU-202 amplifier breeder signals NMEA 0183
ADU-202 unit is designed to strengthen and reproduction of signals NMEA 0183 versions 1 and 2, as well as other signals in the serial data via RS-232 and RS-422/485. In addition, the unit ADU-202 has an integrated adder, which allows you to combine the NMEA 0183 received from the input channels, and send the result to one or two groups of outputs, depending on how the jumpers on the circuit board of the device.
ADU-block 202 can operate in five different modes, each of which is set by the user by means of jumpers on the printed circuit board device.
- adder
- Independent signaling
- Breeder with manual selection of active input
- Breeder with automatic selection of active input
- Mode with CRC check
Specifications:
- Supply voltage 9 .. 36 V DC. current
- Power consumption less than 5 W
- Overall dimensions of 244 mm x 146 mm x 55 mm
- Storage temperature - 55 ° C .. + 75 ° C
- Operating temperature - 25 ° C .. + 55 ° C
- 2 kg
Available for order
Documentation:
Marine bilge drainage system
In order to keep the holds dry and pump out excess water, ships must have a so-called drainage system (bilge line).