ENG
CompassNet Multiple Gyrocompass System Configurations
CompassNet Multiple Gyrocompass System Configurations
02.10.2017
X Any course sensor: NAVIGAT 3000 , NAVIGAT 2200 , or NAVIGAT 200
* In TMC systems, the NAVITWIN V motion control system provides an independent magnetic course source (NMEA serial data) for distribution to compass transmitters and other peripheral equipment in the event of gyrocompass failure.
** Each transmitter NAVIGAT 3000 or NAVIGAT 2200 requires one converter and an amplifier board (CAB) or a converter and amplifier (CAU). A maximum of 2 CABs can be set in the data block, a third sensor requires a CAU.
Special note. Please note that only the above configurations are technically approved.
NAVIGAT 3000 / NAVIGAT 2200 / NAVIGAT 200
Entity_Sensor for_multisystem with 1 GK |
Entity_Sensor for_multisystem with 2 GK |
Entity_Sensor for_multisystem with 3 GK |
Multidiscope sensor with 4 GK |
|
Data_Distribution Module (DDU) |
DDU_processor module |
Converter_and_Amplifier Board_or_Unit |
Fluxgate_(sine / cosine)_for_JUPITER |
|
System of two gyrocompasses |
X |
X |
|||||||
System of two gyrocompasses with TMC function * |
X |
X |
|||||||
System of three gyrocompasses |
X |
X |
X |
||||||
System of three gyrocompasses with TMC function * |
X |
X |
X |
||||||
System of four gyrocompasses |
X |
X |
X |
X |
|
||||
System of four gyrocompasses with TMC function * |
X |
X |
X |
X |
|
X Any course sensor: NAVIGAT 3000 , NAVIGAT 2200 , or NAVIGAT 200
* In TMC systems, the NAVITWIN V motion control system provides an independent magnetic course source (NMEA serial data) for distribution to compass transmitters and other peripheral equipment in the event of gyrocompass failure.
** Each transmitter NAVIGAT 3000 or NAVIGAT 2200 requires one converter and an amplifier board (CAB) or a converter and amplifier (CAU). A maximum of 2 CABs can be set in the data block, a third sensor requires a CAU.
Special note. Please note that only the above configurations are technically approved.