ENG

Fire Heat Detectors IP 102-2Х2

Fire Heat Detectors IP 102-2Х2
Available for order

Fire Heat Detectors IP 102-2Х2

to order
Call our sales manager
Fire heat detector SP-102 2X2 (Addi-T) provides protection against ignition ship spaces. Detector IP102-2X2 is designed to detect fire (overspeed temperature rise of ambient air set threshold) in enclosed spaces, including vpomescheniyah with explosive zones and hostile environments. Convenient to protect the cable galleries, cable ducts, tunnels, warehouses. SP-102 2X2 (Addi-T) has serifikaty approval of the Russian River and Russian Maritime Register.
 
Heat detector multi-SP 102 2X2 (Addi-T) transmits an alarm signal to the receiving-control, fire, fire-protection devices and other devices with current standards in line signaling at least 3 mA (priborypriemno-control fire PPKP019-20/60 (PPS-3), remote control receiver-PPK-2, 'Signal 42', 'Frontier', 'Argus', 'Rainbow', 'Signal-20P' device Fire alarm actuating USPP1041-4-1 and t . etc.). Detector IP102-2X2 isp.02 applied to the complex technical equipment fire alarm for sea and river vessels CCC 'SPAS-CM.'
 
The main way of detector installation is rope suspension. Maximum distance from wall 3 m, 15 mm minimum permitted laying on a wire directly to the wall. Spacing shall not exceed 6 m length multipoint thermoelectric sensor - up to 300 m, which protects the premises up to 2000 m. m is widely used for the protection of small vessels and dry cargo holds.
 
Produced wired sensor design multipoint DPT-A thermocouple in a metal containment. The maximum length of sensor connected to one block BS is 300m, the minimum length of the sensor DPT - 10m (20m for DPT-A).
 
Allows operation in harsh conditions:
  • increased to 100% humidity;
  • wide temperature range from -60 ° C to 130 ° C;
  • corrosive environments on a group x2;
  • dust, vibration, strong electromagnetic and electrostatic interference.
Variants:
  • isp.01 for general objects
  • isp.02 to protect vehicles; sea and river vessels, w / d of transport etc. (complete with mounting frame)
Applies independently with backup power units type BRP-24, SPS-24, etc., and is also consistent with domestic and imported alarm control. The consumption current in standby mode, no more than 3 mA.

Connecting AIS TRANSAS T105 to a computer 22.02.2015 Connecting AIS TRANSAS T105 to a computer
Connection options for AIS TRANSAS T105 to a computer