Magnetron MG5125X

Magnetron MG5125X
Available for order

Magnetron MG5125X

to order
Call our sales manager
MG5125X Magnetron for linear accelerators operating at frequencies 2993 - 3002 MHz with a maximum power output of 2000 kW.
It is recommended that the magnetron has been isolated from the load by means of an insulator, and a DC power source was used for heater control. Using an AC source may damage the heater circuit.
Magnetron MG5125X cooled by water and has a built-in waterproof case. Recommended flow rate of 5 liters per minute or more, the pressure flow rate is about 1.25 kg / cm2. Leaving water temperature should not exceed 50 C.
Specifications:
  • The maximum anode voltage - 47 kV
  • Maximum anode current of -100 A
  • Input Power - 5.0 kW
  • Pulse duration - 5.0 ms
  • The rate of rise of the pulse voltage - 120 kV / m
  • Frequency: 2993 to 3002 MHz
  • Average output power - 2500 kW
  • Heater Voltage - 10 V
  • Weight - 8 kg

Magnetron MG5125XMagnetron MG5125X

Magnetron MG5125X

Additional Information
Summary table of magnetrons
How to replace a magnetron with a radar
Magnetrons for radar in stock

Installation of TADS ENC / SENC / AIO electronic cards 19.10.2016 Installation of TADS ENC / SENC / AIO electronic cards
Installation of TADS ENC / SENC / AIO electronic charts CHART COLLECTION