APS-120

APS-120
Available for order

APS-120

to order
Call our sales manager
Block automatic switching power supply APS-120 is designed to provide continuous power to the load mode by switching the main power to the reserve, in case of failure first.
The output of the automatic switching power supply APS-120, designed for loads connected to the input terminals of BPU and BAT through the built-in relays. When the main power supply board network input BPU relay whose contacts are connected to the output terminal of the load input BPU. In case of failure of the main power inlet BPU relay is switched off, and the contacts are connected to the output terminal of the load input BAT.
 
The block automatic switching power supply APS-120 integrated fuse for short circuit protection.
Specifications:
  • Dimensions 158x127x54 mm
  • Degree of protection IP 22
  • Weight 0.3 kg
  • Operating voltage of 24 V (12 V) DC from input IN1
  • Backing 24 V (12 V)
  • The output voltage follows voltage N1 or N2, depending on the mode state
  • Rated current (switching) 20 A
  • Power consumption 1.5 W

Sources of Error 23.12.2021 Sources of Error
Errors exist that distort the radar image so that it does not correctly display the information required by the navigator