+7 (812) 4-673-673
PEL-100
PEL-100 - surveying sonar to measure the depth of the shallow ponds, rivers, coastal marine waters area. Measurements made with small vessels such as boats, boats and other. Sounder PEL-100 displays the information on a digital display and outputs it in NMEA-0183 protocol, the data is collected and stored for processing dalneyshne. Sounder PEL-100 can simultaneously work with the GNSS receiver.
Software Sonar PEL-100 amends the measured depths of burial for a given antenna and value of the speed of sound in water. Also software determines the calibration setting parameters and values, and displays the data in real time. The structure of the sonar PEL-100 includes: sonar antenna (converts electrical signals into sonar, and vice versa), the operating and display unit (generates and processes the signals for managing, storing and displaying information), power supply and mounting kit (for attaching the sonar to various floating craft).
Specifications:
- The range of measured depth: 0,4-100 m
- Instrumental error:
- no more than ± 1 cm at a depth of 10 m
- 0.1% at a depth of more than 10 m
- Terms of Use:
- water temperature of 0 to 40 °
- salinity from 0 to 40 ‰
- vessel speed to 7 knots (at installation
- antenna on the outboard device)
- bottom slope to 15 °
- list of the vessel to 10 °
- trim of the vessel of up to 5 °
- Resolution display depth of 1 cm
- Display - LCD
- at least 2 rows x 16 characters
- Depth data recording capacity parameters at intervals of 1 s - at least 8 hours
- The length of the antenna, ISP 3 m cable
- Power supply ± 12 V
- Time of continuous work from batteries - at least 8 hours
- ISP mass of not more than 3 kg
- Dimensions ISPs: 111 x 190 x 123 mm
- Weight of the antenna cable 3 m no more than 1.5 kg
- Antenna diameter not exceeding 82 mm
Available for order
