Useful articles
Marine bilge drainage system
In order to keep the holds dry and pump out excess water, ships must have a so-called drainage system (bilge line).
02.10.2017
* In TMC systems, the NAVITWIN V motion control system provides an independent magnetic course source (NMEA serial data) for distribution to compass transmitters and other peripheral equipment in the event of gyrocompass failure.
** Each transmitter NAVIGAT 3000 or NAVIGAT 2200 requires one converter and an amplifier board (CAB) or a converter and amplifier (CAU).
Special note. Please note that only the above configurations are technically approved.
CompassNet Single Gyrocompass System Configurations
NAVIGAT 3000 / NAVIGAT 2200 / NAVIGAT 200 / NAVIGAT 100
|
GIROCOMPAS NAVIGAT_3000 |
GIROCOMPAS NAVIGAT_2200 |
GIROCOMPAS NAVIGAT_200 |
GIROCOMPAS NAVIGAT_100 |
|
Data_Distribution Module (DDU) |
DDU processor module |
Converter_and_Amplifier Board_or_Unit |
Fluxgate_(sine / cosine)_for_JUPITER |
|
| Single gyrocompass system NAVIGAT 3000 |
|
|
|
|
|||||
| Single gyrocompass system NAVIGAT 3000 with TMC function * |
|
|
|
|
|
|
|||
| Single gyrocompass system NAVIGAT 2200 |
|
|
|
|
|||||
| Single gyrocompass system NAVIGAT 2200 with TMC function * |
|
|
|
|
|
|
|||
| Single gyrocompass system NAVIGAT 200 |
|
|
|
||||||
| Single gyrocompass system NAVIGAT 200 with TMC function * |
|
|
|
|
|
||||
| Single gyrocompass system NAVIGAT 100 |
|
|
* In TMC systems, the NAVITWIN V motion control system provides an independent magnetic course source (NMEA serial data) for distribution to compass transmitters and other peripheral equipment in the event of gyrocompass failure.
** Each transmitter NAVIGAT 3000 or NAVIGAT 2200 requires one converter and an amplifier board (CAB) or a converter and amplifier (CAU).
Special note. Please note that only the above configurations are technically approved.