+7 (812) 4-673-673
NMEA-Resolver
Serial adapter SE- 01 is designed for older sinhroperiferiynyh devices , allowing them to use the new gyrocompass , non sinhrovyhodov . The device is installed instead of the synchro and imitates his work. Standard design concept has dimensions selsina SS- 150. The design can be changed according to the installation conditions . Minimum dimensions of the replaced synchro - ?42x60mm .
SE- 01 Features :
- Rated voltage, V 24
- Extras. deviation of the supply voltage in the range ± 10
- Input : '$ ** HDT, xxx.x, T *** \ n \ r'
- Rotational receiving at last . channel , bits / s auto-negotiation (autoboadrating) 4800/9600/19200
- The gear ratio 360h
- Accuracy of ± 0,02 ? course
- Maximum speed mining rate , / sec 6
- Power consumption , not more than 5
- Same board backlight 10
- Overall dimensions 52x60mm
- Weight, kg 0.3
12.09.2021
Factory acceptance tests
Commissioning is the process of fine-tuning the installed equipment so that it works correctly and performs its functions. They are carried out in stages, starting from the manufacturer's workshop, where important equipment is checked before being sent to the shipyard. These checks carried out by the manufacturer are called Factory Acceptance Test (FAT). They confirm that the equipment was in order when it left the shop.