ENG

Signal Multiplier NMEA 0183 CIR MP-01A

Signal Multiplier NMEA 0183 CIR MP-01A
Signal Multiplier NMEA 0183 CIR MP-01A
Signal Multiplier NMEA 0183 CIR MP-01A
Signal Multiplier NMEA 0183 CIR MP-01A

The signal multiplier NMEA 0183 CIR MP-01A , depending on the firmware, performs various functions, including the conversion of data transmitted via the serial port. 

CIR MP-01A can be used on board as an NMEA signal booster / multiplier, as well

  • Changes the frequency of transmitted data (autopilot requires 5-10Hz)
  • Changes the NMEA message tokers (e.g. data from a SCHDT satellite compass to HEHDT)
  • Allows the formation of a different package from incoming data (for example, the speed from the GNSS receiver from GPVTG to the speed from the lag SLVBW, the course from the GNSS receiver ** VTG to the course from the gyrocompass HEHDT).
  • Converts data from NMEA format to COURSE BUS (sending format for peripherals manufactured by Anschutz Standart, for example, for matching Anschutz steering systems with any other gyrocompass)
  • Converts data from COURSE BUS to NMEA (inverse transformation).


Specifications:

dimensions

115x84x46 mm

Protection class

ip 22

Storage temperature

-55 .. + 75 ° C

Working temperature

-30 .. + 55 ° C

Weight

324 grams

Supply voltage

16-38 V

Power consumption

≤ 2 watts

Galvanic isolation from the mains

there is

Reverse polarity protection

there is

Surge protection

there is

Number of Input Ports

one

Supported Interfaces

RS-232/422

Maximum data rate

115200 bps

Opto-isolation of inputs

there is

Number of Output Ports

2

Supported Interfaces

RS-232/422

Maximum data rate

115200 bps

Available for order

Signal Multiplier NMEA 0183 CIR MP-01A

to order
Call our sales manager

Online registration of EPIRB Online registration of EPIRB Registration of the EPIRB  is carried out in accordance with the Regulation on Registration of Emergency Beacons