ACM-MD-V2 Telephone Exchange

ACM-MD-V2 Telephone Exchange
Certificate:
  • RMRS
Available for order

ACM-MD-V2 Telephone Exchange

to order
Call our sales manager
Certificates:
ACM-MA-V2 Telephone exchange is made to work on a ship at sea. It is located in a wall cabinet, which is optimized for easy installation and maintenance. All compounds are easily accessible from the front. Exchange of information between the various available number of subscribers, from 24 to 72. The switch can be powered by AC and / or DC power supply has an automatic switching function.
 
ACM-MA-V2 Telephone Exchange supports IP-DECT and cordless phones as well as receive calls from public addresses. Perhaps the remote management and maintenance using IP and Web-based technologies.
 
Specifications:

ACM-MD-V2 Telephone Exchange

  • Dimensions: 600mm x 600mm x 350mm
  • Weight - 45 kg
  • Mounting - wall
  • Temperature range: 0 - 55 ° C (recommended 18 - 25 ° C)
  • Power: 230 VAC from the network; automatic switching between network and emergencies
  • Class IP: IP-22
  • The subscriber capacity: 60 analog phones
  • Call Capacity: up to 12 simultaneous calls
  • Interface: PA 0dB / 600? audio, 1 relay for call signaling PA
  • IP multi-module up to 2 rack system
  • Data interfaces 2 x 10, 100 Mbit Ethernet AutoMDIX (RJ45), 1 x RS232 serial data (RJ45)
  • IP protocols: IP unicast - IP Multicast. IP v4 - TCP - UDP - Telnet - FTP - TFTP - NTP - HTTP - HTTPS- Syslog - SNMP v2c - data RTCP- VoIP AlphaNet- Vingtor-Stentofon - - RTP OPC
  • Remote management system AlphaPro over IP, Web

 

Synchronous use of different types of electronic chart 21.12.2021 Synchronous use of different types of electronic chart
If electronic charts other than ENCs are used in ECDIS then a message will be presented that warns the Navigator to use official, corrected charts for navigation