+7 (812) 4-673-673
The composition of the Rescue and Rescue property for river vessels
The composition of the Rescue and Rescue property for river vessels
River vessels, being built and operated, should be equipped with emergency equipment.
For non-self-propelled vessels, non-self-propelled vessels with unicomponent unsinkability, non-self-propelled vessels of classes "P" and "L" of less than 30 m in length with a crew of non-self-propelled tankers, regardless of length, passenger and vessels for crossings with a flight duration of less than 1 hour; self-propelled classes "O", "R" and "L" with a crew of not more than three people on a voyage, self-propelled classes "P" and "L" of less than 25 m in length, hydrofoils, air-cushioning, floating and floating emergency supplies not required. Tugboats and pushers working with non-self-propelled vessels
equipped with emergency supply for ships, a group of which is one position higher than the group of the tugboat or pusher. Tugs and pushers with a length of more than 15 m are supplied according to the norms for V vessels.
To determine the standards of emergency supply vessels are divided into 10 groups:
I - self-propelled classes "M" and "O" with a length of more than 90 m;
II - self-propelled classes "M" and "O" with length from 40 to 90 m inclusive;
III - self-propelled classes "M" and "O" with length from 25 to 40 m inclusive and classes "P" and "L" with a length of more than 70 m;
IV - self-propelled classes "P" and "L" with length from 40 to 70 m inclusive;
V - self-propelled classes "P" and "L" with length from 25 to 40 m inclusive and classes "M" and "O" up to 25 m in length;
VI - non-self-propelled classes of "M-SP", "M-PR", "O-PR", "M" and "O";
VII - non-self-propelled classes "P" and "L" with a length of 30 m and more.
VIII - self-propelled classes "M-SP" and "M-PR" with a length of 70 to 140 m.
IX - self-propelled classes "M-SP" and "M-PR" length from 30 to 70 m inclusive and self-propelled class "O-PR" length from 30 to 140 m.
X-self-propelled classes "M-SP", "M-PR" and "O-PR" with a length of less than 30 m.
Norms of emergency supply
|
Item No. |
Name |
Number of supplies by ship group |
|||||||||
|
I |
II |
III |
IV |
V |
VI |
VII |
VIII |
IX |
X |
||
|
1 |
Soft adhesive patch 3,0X3,0 m, pcs. |
1 |
- | - | - | - | - | - |
1 |
1 |
- |
|
2 |
Soft patch plaster 2,0X2,0 m, pcs. | - |
1 |
- | - | - | - | - | - | - | - |
|
3 |
Plaster canvas or training3,0X3,0 m, pcs. | - | - |
1 |
- | - | - | - | - | - | - |
|
4 |
Plaster canvas or training 2,0X2,0 m, pcs. | - | - | - | - | - | - | - | - | - |
1 |
|
5 |
Equipment for plaster, kit |
1 |
1 |
1 |
- | - | - | - |
1 |
1 |
1 |
|
6th |
Mat rolled 0.40.5 m, pcs. |
1 |
1 |
1 |
- | - | - | - |
2 |
2 |
1 |
|
7th |
Parusine half-liner SKPV, m2 | - | - | - |
4 |
4 |
4 |
2 |
- | - | - |
|
8 |
The rigging tool set in the bag | - | - | - | - | - | - | - |
1 |
1 |
1 |
|
9 |
Set of metalwork tools in a bag |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
|
10 |
Cement quick-hardening not lower than mark 400, kg |
100 |
75 |
50 |
50 |
50 |
75 | 50 | 200 | 100 | 50 |
| eleven | Sand for construction, kg | 100 | 75 | 50 | 50 | 50 | 75 | 50 | 200 | 100 | 50 |
| 12 | Glass liquid (accelerator of solidification of concrete), kg | 5 | 4 | 2.5 | 2.5 | 2.5 | 4 | 2.5 | 10 | 5 | 2.5 |
| 13 | Beam pine 100X100X2000 mm, pcs. | 2 | 2 | 2 | 2 | 1 | 2 | 1 | 4 | 2 | 1 |
| 14 | Pine board 50X200X2000 mm, pcs. | - | - | - | - | - | - | - | 2 | 2 | - |
| 15 | Pine board 50X200X4000 mm, pcs. | 1 | 1 | 1 | 1 | - | 1 | 1 | 2 | 2 | 1 |
| 16 | Pine board 20X150X2000 mm, pcs. | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - | - |
| 17th | Wedge birch 60X200X400 mm, pcs. | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 2 |
| 18 | Wedge pine 30X200X200 mm, pcs. | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 2 |
| 19 | Wedge pine 50X150X200 mm, pcs. | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 8 | 8 | 2 |
| 20 | Pine pine for ships with side windows, pcs. (according to the diameter of the portholes, 400 mm long) | 2 | 2 | 1 | 1 | 1 | 2 | 1 | 2 | 2 | 1 |
| 21 | Pine pine 10X30X150 mm, pcs. | 2 | 2 | 1 | 1 | 1 | 1 | 1 | 4 | 4 | 2 |
| 22 | Felt technical coarse coat 10 mm thick, m2 | 1 | 1 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 1.5 | 1.5 | 1 |
| 23 | Rubber sheet with a thickness of 5 mm, m2 | 0.5 | 0.5 | 0.5 | 0.25 | 0.25 | 0.25 | 0.25 | 0.5 | 0.5 | 0.5 |
| 24 | Parusine half-liner SKPV, m2 | - | - | - | - | - | - | - | 4 | 2 | 1 |
| 25 | Pakla resin belt, kg | 10 | 10 | 5 | 5 | 2.5 | 10 | 2.5 | 20 | 15 | 10 |
| 26th | Steel wire low-carbon 3 mm in diameter, coil | 0.5 | 0.5 | 0.25 | - | - | 0.5 | - | 1 | 0.5 | 0.5 |
| 27th | Bracket construction 12 mm in diameter, 300 mm long, pcs. | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 |
| 28 | Construction nails 3X70 mm, kg | 1.5 | 1 | 1 | 0.5 | 0.5 | 1 | 0.5 | 3 | 2 | 2 |
| 29 | Construction nails 6X150 mm, kg | 2 | 1.5 | 1 | 1 | 0.5 | 1 | 0.5 | 4 | 3 | 2 |
| thirty | Hexagon head bolts M16X400, pcs. | - | - | - | - | - | - | - | 4 | 2 | - |
| 31 | Hexagon head bolts M16X260, pcs. | 2 | 2 | 2 | 2 | - | 2 | - | 4 | 2 | - |
| 32 | Hexagon nut M16, pcs. | 2 | 2 | 2 | 2 | - | 3 | - | 8 | 2 | - |
| 33 | Washer under the nut M16, pcs. | 4 | 4 | 4 | 4 | - | 4 | - | 8 | 4 | - |
| 34 | Iron wool stiffened, kg | 2.5 | 1.5 | 1 | 1 | - | 1.5 | 1 | 10 | 5 | 2.5 |
| 35 | Fat technical, kg | 2.5 | 1.5 | 1 | 1 | - | 1.5 | 1 | 5 | 5 | 2 |
| 36 | Saw on wood transverse two-hand length 1200 mm | 1 | 1 | 1 | - | - | - | - | 1 | 1 | 1 |
| 37 | Saw-hacksaw for wood cross-section length of 615 mm | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 38 | Construction ax, pcs. | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 39 | Ax top for ax (spare), pcs. | - | - | - | - | - | - | - | 1 | 1 | 1 |
| 40 | Sledge-hammer * forging with a blunt mass of 5 kg, pcs. | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 41 | Shovel pick-up LP, pcs. | - | - | - | - | - | - | - | 2 | 2 | 2 |
| 42 | Scoop for sand, pcs. | - | - | - | - | - | - | - | 1 | 1 | 1 |
| 43 | Bucket galvanized cone with a canvas with a capacity of 12 liters, pcs. | - | - | - | - | - | - | - | 2 | 2 | 2 |
| 44 | A sliding metal extension 1.7 m long | 1 | 1 | - | - | - | - | - | 2 | 2 | 2 |
| 45 | Emergency clamp, pcs. | 1 | 1 | - | - | - | - | - | 1 | 1 | 1 |
| 46 | Flashlight hand-held battery explosion-proof, pcs. | - | - | - | - | - | - | - | 1 | 1 | 1 |
| 47 | Bagore with a horn (only on ships with wooden superstructures), pcs. | - | - | - | - | - | - | - | 2 | 2 | 2 |
| 48 | Pump immersion type ESN-16 complete with hoses feed 30-40 t / h, pcs. (recommended) | - | - | - | - | - | - | - | 1 | 1 | 1 |
| 49 | Tare impermeable for 50 kg for cement, pcs. | - | - | - | - | - | - | - | Defines the designer or the shipowner | ||
| 50 | Banks for storing tar, liquid glass and technical grease with a capacity of 5 kg, pcs. | - | - | - | - | - | - | - | |||
| 51 | Storage box for inventory and supplies, pcs. | - | - | - | - | - | - | - | |||
| 52 | The register of emergency supply, pcs. | - | - | - | - | - | - | - | 1 | 1 | 1 |
Norms of supply with metalwork tools
|
Item No. |
Name |
Number of tools per set, pcs. |
|
1 |
Hammer * metalworking weights0.5 kg with handle |
1 |
|
2 |
Sledge-hammer * Forging dead-end weight of 3.0 kg |
1 |
|
3 |
Chisel * 20 mm wide |
1 |
|
4 |
Pile length 200 mm |
1 |
|
5 |
Pliers (universal pliers) with a length of 200 mm |
1 |
|
6th |
Cutting with a diameter of 18 mm |
1 |
|
7th |
Cutting with a diameter of 25 mm |
1 |
|
8 |
File trihedral with a length of 300 mm |
1 |
|
9 |
Half-round file length 300 mm |
1 |
|
10 |
Screwdriver * 10 mm wide, 150 mm long |
1 |
|
eleven |
Screwdriver for screws and cross-slotted screws |
1 |
|
12 |
Key * spanner with a swivel spiral to 36 mm |
1 |
|
13 |
13. Wrench * open-ended wrench 22.24 mm |
1 |
|
14 |
Hacking machine |
1 |
|
15 |
Cloth hacksaw |
8 |
|
16 |
Nippers (cutting pliers) |
1 |
Norms of supply with a rigging tool
|
Item No. |
Name |
Number of tools per set, pcs. |
|
1 |
Hammer * metalworker with a weight of 0.5 kg with a handle |
1 |
|
2 |
Chisel * 20 mm wide |
1 |
|
3 |
Pile length 200 mm |
1 |
|
4 |
Chisel carbide length 300 mm, width 200 mm |
1 |
|
5 |
Ticks * 200 mm long |
1 |
|
6th |
Measuring tape measuring 2000 mm long |
1 |
|
7th |
Chisel width 20 mm |
1 |
|
8 |
Borodok in diameter of 4 mm |
1 |
Supplies marked in the tables with the "*" symbol should be delivered to oil-loading vessels carrying flammable liquids with a flash point of 60.C and below, in a design that excludes sparking.
Иностранный язык: en